> From https://brixsignage.com/blog/change-wifi-on-amazon-signage-stick-remotely/ . All Brix pages as markdown: https://brixsignage.com/llms.txt

# Change Wi-Fi on an Amazon Signage Stick Remotely

How to change the Wi-Fi on an Amazon Signage Stick without a visit, why the Amazon app needs you nearby, and how to plan a router swap so no screen goes dark.

Hardware Published September 30, 2026 Updated November 16, 2026

To change the Wi-Fi on an Amazon Signage Stick without going to it, use a signage CMS that supports remote Wi-Fi through Amazon's Remote Management API. Send the new network while the stick is still online on the old one. Amazon's own tools need someone near the stick: the physical remote, or the mobile app's virtual remote, which opens the stick's Settings menu only over Bluetooth.

## Your three options

| Method | Where you need to be | How |
| --- | --- | --- |
| Physical remote | At the screen | **Settings > Network & Internet > Wi-Fi**, select the network, enter the password |
| Amazon Signage mobile app | Within Bluetooth range of the stick | Open the virtual remote, then the same Settings path |
| A CMS with remote Wi-Fi | Anywhere | Send the network name and password from the dashboard |

Remote Wi-Fi is part of version 1.2 of Amazon's Remote Management API, which signage software builds on. Only CMSs that use it can change the network from a distance. Amazon's [CMS partners page](https://signage.amazon.com/cms-partners) lists the CMSs that support the Signage Stick.

## Changing the router or the password without losing screens

The stick can only receive a new network over the network it is on. Once the old network is gone, no CMS can reach it. So the order matters:

1.  **Before the change,** send the new network name and password to every stick while the old network still works. The stick saves it.
2.  **Make the change** on the router.
3.  **Check** that each stick comes back online on the new network.
4.  **Any stick still offline** needs someone at the screen with the remote.

Changing only the password and keeping the network name is the risky case. If you push a new password for a network the stick already has saved and it is wrong, the stick drops that network the next time it reconnects and does not try it again. Only someone at the screen can fix that. The safe way: give the network a new name when you change the password, then push it as a new network with the steps above. If the name must stay, change the password at each screen with the Amazon Signage phone app.

## Things that go wrong

-   **A typo in the password.** The stick cannot test a network that is not in range, so a wrong password shows up only on the day of the switch. Type it twice, or paste it.
-   **Enterprise Wi-Fi.** Amazon's [Wi-Fi support page](https://signage.amazon.com/support/wi-fi-network) lists Enhanced Open, WEP, WPA/WPA2-Personal and WPA3-Personal, and says WPA2 and WPA3-Enterprise are not supported. A network that needs a username or a certificate is a job for Ethernet.
-   **Hidden networks.** During setup the stick lists only networks that broadcast their name. Use "Join Other Network" on the remote, send the network from a CMS that can mark it as hidden, or connect over Ethernet.
-   **Guest networks with a sign-in page.** Someone at the TV must complete the page with the remote, so a remote push alone does not get the stick online. A private network avoids the visit. See [hotel guest Wi-Fi on the Signage Stick](https://brixsignage.com/blog/amazon-signage-stick-hotel-guest-wifi/) and [keeps disconnecting](https://brixsignage.com/blog/amazon-signage-stick-keeps-disconnecting/).
-   **A stick on Ethernet.** It does not need Wi-Fi at all. Leave it wired.

## Where Brix fits

On a Signage Stick, Brix sends Wi-Fi through Amazon's device agent on the stick:

-   **One screen:** open the screen, expand **Player**, and select **Change Wi-Fi** under the network it is on. Enter the network name, the security type and the password. For a hidden network, tick **This network does not show its name**.

![The Change Wi-Fi dialog for one Signage Stick.](https://brixsignage.com/images/screenshots/screens-wifi-change-dialog.png)

The Change Wi-Fi dialog for one Signage Stick.

-   **Many screens:** select them on the **Screens** list, open **More** in the bar that appears, and choose **Change Wi-Fi**. Use it to prepare sticks on a bench before they ship to a store, so nobody there needs the password.

![The bar that appears when you select screens, with the More menu.](https://brixsignage.com/images/screenshots/screens-bulk-action-bar.png)

The bar that appears when you select screens, with the More menu.

-   **A backup network:** under **Change Wi-Fi**, **Backup network** saves a second network, such as the store's guest Wi-Fi or a manager's hotspot. The stick joins it only after it has failed to reach Brix for a number of days you choose (3 by default), so a short Wi-Fi blip never moves it.

![The Wi-Fi section of a Signage Stick, with the Backup network form open.](https://brixsignage.com/images/screenshots/screens-wifi-backup-network.png)

The Wi-Fi section of a Signage Stick, with the Backup network form open.

What Brix does and does not promise:

-   Brix sends personal networks (WPA2, WPA3, WPA, WEP or [open Wi-Fi with no password](https://brixsignage.com/guides/amazon-signage-stick-open-wifi-no-password/)), not enterprise networks.
-   The stick **saves** the network. If the network is in range, the stick joins it at once. If not, it joins when the network appears. Brix cannot check the password before the switch. If the stick does not connect within 24 hours, Brix deletes the details; send them again.
-   Brix does not send a network the stick already has saved, because a wrong password there takes the stick offline. To change the password of a saved network, use the Amazon Signage phone app at the screen.
-   The option appears only on the Amazon Signage Stick, and not on a stick connected by Ethernet. Other players need the network entered on the device.
-   Passwords do not appear in the activity log or the live command feed.
-   A command sent to an offline stick waits for it to reconnect, over the network it knew. If that network is gone, someone at the screen enters the new one.

## FAQ

### How do I know the stick switched networks?

Open the screen in your CMS. When it is back online, check which network it reports. In Brix, the **Player** section shows the network name and signal.

### Can I change the Wi-Fi on a Fire TV Stick the same way?

Brix offers remote Wi-Fi only on the Signage Stick. On a consumer Fire TV Stick, change the Wi-Fi on the device.

[Start a free trial](https://brixsignage.com/start) and send a network to a stick on your bench. New to the stick? See the [setup guide](https://brixsignage.com/guides/hardware-amazon-signage-stick/).

Putting Brix on a Stick? See [Amazon Signage Stick software](https://brixsignage.com/amazon-signage-stick/): the price, the four setup steps and what Brix controls on the Stick.
